Imagine™ Zirconia


"Finally, a highly translucent monolithic zirconia, with twice the strength of lithium disillicate and comparable to Zenostar®/e.max ZirCAD prices." -Cindy Turner, CDT, All Ceramic Manager

Our newest zirconia offering, this blend of 80% Zirconia and 20% Alumnia provide the same precise fit of Zenostar®/e.max ZirCAD with the translucency of e-max® Press and twice the strength.  At 769 MPa, Imagine™ is recommended for all teeth in the posterior up to 3 unit bridges and even for some anterior cases.  Due to the translucency, Imagine™ crowns like e-max® Press, cannot be used with the stump shade is dark.  Preparation requirements are similar to e-max® Press.

Indications: This restoration can be suitable for all areas when the stump shade is not too dark. Also for use in small three unit bridgework.
Contra-indications: We do not recommend this monolithic zirconia restoration for single anterior teeth where “e.max® Press” can be used.
Preparation: 1.5mm minimal reduction occlusally, 1.5mm axially with champher margins 0.8mm preferred for best strength and fits.
Seating: Cementable with any conventional crown and bridge cement, although the translucency may allow some cement shades to affect the final crown shade.
Shade Guide: Best suited for C and D shades, as well as 3L1.5 through 5M3. All shades tend to be lower in value.

Nakanishi Imagine™ Zirconia Flyer


btn rx_form btn prep_guide Blue-Button



Nakanishi Imagine Zirconia