Imagine™ Zirconia
"Finally, a highly translucent monolithic zirconia, with twice the strength of lithium disillicate and comparable to Zenostar®/e.max ZirCAD prices." -Cindy Turner, CDT, All Ceramic Manager
Our newest zirconia offering, this blend of 80% Zirconia and 20% Alumnia provide the same precise fit of Zenostar®/e.max ZirCAD with the translucency of e-max® Press and twice the strength. At 769 MPa, Imagine™ is recommended for all teeth in the posterior up to 3 unit bridges and even for some anterior cases. Due to the translucency, Imagine™ crowns like e-max® Press, cannot be used with the stump shade is dark. Preparation requirements are similar to e-max® Press.
Indications: |
This restoration can be suitable for all areas when the stump shade is not too dark. Also for use in small three unit bridgework. |
Contra-indications: |
We do not recommend this monolithic zirconia restoration for single anterior teeth where “e.max® Press” can be used.
|
Preparation: |
1.5mm minimal reduction occlusally, 1.5mm axially with champher margins 0.8mm preferred for best strength and fits. |
Seating: |
Cementable with any conventional crown and bridge cement, although the translucency may allow some cement shades to affect the final crown shade. |
Shade Guide: |
Best suited for C and D shades, as well as 3L1.5 through 5M3. All shades tend to be lower in value. |
Nakanishi Imagine™ Zirconia Flyer
Downloads
|
 |